S&C Vista SD - Page 16

16 S&C Instruction Sheet 695-535
STEP 2.
Click on the “Control Settings” tab on the side menu. Then navigate to the
“Change Admin Password” section of the Control Settings tab. See Figure 7.
Control Settings
Figure 7. The “Change Admin Password” menu.
STEP 3. If desired, click on the Eye icon on the right side of the Current Password
eld to reveal the text of the password. See Figure 8.
Eye icon
Figure 8. Click on the “Eye” icon to reveal the password.
STEP 4. Enter a new password, an alpha-numeric sequence of a minimum of 4
characters and a maximum of 12 characters with at least one letter, one number
and one special character: !, #, $, *, _ or – into the New Password eld.
Passwords are case sensitive. Re-enter the new password in the Conrm
Password eld.
STEP 5. Click on the Save button directly under the “Change Admin Password”
section. A message that the password has been saved successfully will open.
See Figure 9.
Figure 9. Click on the “Save” button. A confirmation message will display.
Logging In for the First Time