S&C Instruction Sheet 695-535 15
NOTICE
DO NOT lose the admin password. For security reasons, there is no password-
retrieval system built in to the overcurrent control. If the admin password is lost, the
control must be returned to S&C Electric Company to restore access to the control.
The overcurrent control comes with two default passwords, one for the “admin” login
and one for the “user” login. (See “User access and privileges” on page 9 for details on
the access levels of the two logins.) S&C strongly recommends changing admin and user
login passwords from the default setting when rst logging in to the control. You will be
prompted to change the user login password upon the rst login under this username.
The default passwords are:
Username Password
admin 4731
user 6601
NOTICE
After changing the password, S&C recommends logging in to the “admin” login
ONLY when directed to do so by S&C Electric Company. Use the “user” login when
general changes need to be made to the Overcurrent Control settings. Use the
View button for regular access to the overcurrent control.
To change the admin password:
STEP 1. At the login screen, enter in the default admin username and password.
See Figure 6.
Default Passwords
Changing the Admin
Password
Logging In for the First Time
Figure 6. Enter the default admin username and password.
To Next Page
Loading...
