S&C Vista SD - Checking Voltage with Potential Indicator

18 S&C Instruction Sheet 695-535
STEP 3. If desired, click on the Eye icon to on the right side of the Current Password
eld to reveal the text of the password. See Figure 12.
Figure 12. Click on the “Eye” icon to reveal the password.
STEP 4. Enter a new password, an alpha-numeric sequence of a minimum of 4
characters and a maximum of 12 characters with at least 1 letter, 1 number and
1 special character: !, #, $, *, _ or – into the New Password eld. Passwords are
case sensitive. Re-enter the new password in the Conrm Password eld.
STEP 5. Click on the Save button. A message that the password has been saved
successfully will open. See Figure 13.
Figure 13. Click on the Save button. A confirmation message will display.
NOTICE
The overcurrent control will logout the user after five minutes of inactivity. Any
settings not saved before the inactivity logout will be lost.
Logging In for the First Time
Eye icon