42 S&C Instruction Sheet 695-535
Viewing Event Logs
Table 7. Control Self-Test Report Description
Self-Test Item Description
Elapsed Time Counter The amount of time the control has been powered
MLS Voltage- Interrupter1 - A
Phase
Magnetic Latching Solenoid trip capacitor voltage
MLS Voltage- Interrupter2 - A
Phase
MLS Voltage- Interrupter1 - B
Phase
MLS Voltage- Interrupter2 - B
Phase
MLS Voltage- Interrupter1 - C
Phase
MLS Voltage- Interrupter2 - C
Phase
ADC Interrupter1 – A Phase Status of the analog to digital converter
ADC Interrupter2 – A Phase
ADC Interrupter1 – B Phase
ADC Interrupter2 – B Phase
ADC Interrupter1 – C Phase
ADC Interrupter2 – C Phase
Power Supply 3.3 V
Status of the on-board power supplies
Power Supply 12 V
Flash memory Test
Status of key microprocessor systemsFRAM memory test
Stack Overflow
Status Legend:
OK – Operating within normal parameters
ERROR – Operating outside of normal parameters (The control requires immediate
servicing. Contact your local S&C Sales Ofce.)
TRIP – Will display under MLS voltage measurements only
To Next Page
Loading...
