25
Customising TV Settings
GB
Balance Adjusts the relative volume of the speakers in a multiple speaker system.
SRS
TruSurround
HD
SRS TruSurround HD™ (TS HD) is a robust multichannel virtualisation technology developed by SRS
Labs that provides an enhanced listening experience unlike any other technology that has been offered
for a two speaker playback environment. TruSurround HD builds upon its predecessor, the industry
leading surround sound virtualiser, SRS TruSurround XT®. Not only does TruSurround HD process up to
6.1 channels for playback over two speakers or headphones, but it also utilises additional proprietary
algorithms from SRS Labs to optimise bass performance, for deep rich bass, dialogue clarity for better
intelligibility of vocals, and definition control for maximum high-frequency clarity. Press the OK button to
select On / Off.
AD Switch
(For DTV mode)
Audio Description is an auxiliary audio function that provides an additional audio track for visually
challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is
sent along with the main audio from the broadcaster.
• Set to “Off” for normal broadcasting sound coming out from speakers.
• Set to “On” to activate the description sound track if available. The availability of Audio Description
sound track is indicated by the visually impaired icon "V.I." in the information banner.
SPDIF Mode Select the digital audio output mode.
3. Press the MENU button to return to the previous menu.
4. Press the EXIT button to exit the menu.
Stereo / Dual Sound Reception (ATV Mode)
When a programme is selected, press the I/II AUDIO button to display the sound information for the selected station.
Broadcast On Screen Display
Mono
Stereo
Dual
MONO
NICAM STEREO
NICAM DUAL I, NICAM DUAL II, NICAM DUAL I/II
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I/II AUDIO button. In mono reception, the
clarity of sound is improved. To switch back to stereo, press the I/II AUDIO button again.
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I/II by pressing the
I/II AUDIO button repeatedly.
DUAL I Sends the primary broadcast language to the loudspeakers.
DUAL II Sends the secondary broadcast language to the loudspeakers.
DUAL I/II Sends the primary and secondary broadcast languages to the
loudspeakers.
Speaker Sound Output Selection (DTV Mode)
While watching a DTV programme, you can press the I/II AUDIO button to display the audio language list (only applicable when
the TV programme has this feature).
Press the
buttons to select an audio language or audio format if available and then press the buttons to select sound
track between L/R (Stereo), L/L (Mono Left) and R/R (Mono Right). Press the OK button to confirm and exit.
S24LED11_IB_111014_Zell.indd 25 14/10/2011 3:36 PM
To Next Page
Loading...
Need help?
General
