Press the 6. buttons and then press the OK button to select
your desired language to be displayed on the menu. Press the
Menu button to return to the previous menu.
Press the 5.
buttons to highlight OSD Language and then
press the OK button or the
button to enter OSD Language
option.
Turning the TV On for the First Time
Connect the mains cable to the mains socket after you have 1.
completed all the connections.
Switch on the 2. I/O POWER ON/OFF switch at the bottom of the
TV. At this stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
Touch the touch control panel of the TV once to activate it 3.
(indicator on the touch control panel will illuminate), and then
press the touch sensitive control
on the touch control panel or
press the
button on the remote control directly to turn the TV
on. The red LED indicator will flash for a few seconds.
Always disconnect the TV from the mains socket when not in use for a long period of time.
The
on the touch control panel or the button on the remote control is only used for switching the TV into
standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please
remove the mains plug from the mains socket or switch off the I/O POWER ON/OFF switch.
The first time you turn the TV on, it will go straight into the4.
Startup Menu. (If you have already installed the TV using the
Quick Start Guide, please go to the next step "Selecting the
Input Source" on page 16.)
To Next Page
Loading...
Need help?
General
