Sangean DPR-42BT - Setting the Clock Format; Setting the Date Format

023
Setting the clock format
Setting the date format
With your radio switched on, press and hold Info / Menu button to access the menu for the current mode.
Rotate the Tuning control knob to select “System Settings”. Press the Select button to enter the
system settings menu.
Rotate the Tuning control knob to select “Time / Date”. Press the Select button to enter the setting.
Rotate the Tuning control knob to select “Set 12 / 24 Hour”. Press the Select button to enter the
clock format setting. The current clock display format is marked with a tick.
Rotate the Tuning control knob to select 12 or 24 hour format. Press the Select button to conrm
your setting. If the 12 hour clock format is chosen, the radio will display a 12 hour clock with an AM
or PM indicator.
With your radio switched on, press and hold Info / Menu button to access the menu for the current mode.
Rotate the Tuning control knob to select “System Settings”. Press the Select button to enter the
system settings menu.
Rotate the Tuning control knob to select “Time / Date”. Press the Select button to enter the setting.
Rotate the Tuning control knob to select “Set Date Format”. Press the Select button to enter the setting.
Rotate the Tuning control knob to select “DD-MM-YYYY” or “MM-DD-YYYY” date format. Press
the Select button to conrm the setting.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.