Sangean DPR-42BT - Set up My EQ Profile

030
Set up My EQ prole
With your radio switched on, press and hold Info / Menu button to access the menu for the
current mode.
Rotate the Tuning control knob to select “System Settings”. Press the Select button to enter the
system settings menu.
Rotate the Tuning control knob to select “Equaliser”. Press the Select button to enter the setting.
Rotate the Tuning control knob to select “My EQ Setup”. Press the Select button to enter the setting.
Rotate the Tuning control knob to select “Treble”. Press the Select button to enter the setting.
Rotate the Tuning control knob to adjust the treble level. The sound will change as you adjust the level.
Press the Select button to conrm the setting. The display will then revert to My EQ Setup menu.
Rotate the Tuning control knob to select “Bass”. Press the Select button to enter the setting.
Rotate the Tuning control knob to adjust the bass level. The sound will change as you adjust the
level. Press the Select button to conrm the setting. The display will then revert to My EQ Setup
menu.
Rotate the Tuning control knob to select “Loudness”. Press the Select button to enter the setting.
Rotate the Tuning control knob to select the desired setting. The options are “Yes” or “No”. Press
the Select button to conrm the setting.
To use the “My EQ” prole, enter the equalizer menu and choose “My EQ”.
To quickly cancel the effect of the “My EQ” prole, choose the “Flat” option from the equaliser menu.
You may set the treble and bass levels as required using the “My EQ Setup” menu.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
The treble and bass settings will be remembered for the next time you wish to use the 'My EQ' setting.
NOTE