033
Factory reset
With your radio switched on, press and hold Info / Menu button to access the menu for the current mode.
Rotate the Tuning control knob to select “System Settings”. Press the Select button to enter the
system settings menu.
Rotate the Tuning control knob to select “Factory Reset”. Press the Select button to enter the setting.
Rotate the Tuning control knob to select “Yes” or “No”. If you do not wish to carry out a system
reset, select “No” and then press the Select button to conrm the setting.
With “Yes” selected, press the Select button. A full reset will be performed. The station list and
presets will be erased. Alarms will be cancelled and settings will be set to their default values.
In case of malfunction due to electrostatic discharge, reset the product (reconnection of power
source may be required) to resume normal operation.
If you wish to completely reset your radio to its initial state this may be performed by following this
procedure. By performing a factory reset, all user entered settings will be erased.
1.
2.
3.
4.
5.
To Next Page
Loading...
