To Next PageTo Next Page
Need help?Do you have a question about the Sanus BLF328 and is the answer not in the manual?
General| Brand | Sanus |
|---|---|
| Model | BLF328 |
| Category | Racks & Stands |
| Language | English |
Details safety precautions, maximum TV weight capacity, and wall mounting requirements.
Specifies acceptable wall types (wood studs, concrete) and warnings against drywall installation.
Lists all necessary tools for assembling and mounting the TV bracket.
Provides detailed measurements of the TV mount components for planning.
Covers essential preliminary steps like removing the TV stand and protecting the screen.
Identifies all hardware and parts included for attaching brackets to the television.
Guides users on choosing the correct TV screws and spacers based on their TV's design.
Instructions on measuring the TV's width and height for the mounting hole pattern.
How to align and adjust the TV brackets to match the TV's VESA width.
Guides bracket assembly for different TV height patterns (under/over 300mm).
Instructions for loosely attaching brackets and centering them on the TV for final alignment.
Final steps to securely fasten all brackets using the provided interface screws.
Lists all parts and hardware required for attaching the wall plate to the wall.
Directs users to the correct installation procedure based on their wall type.
Steps for finding, verifying, and marking the precise locations of wood studs.
Using the template to guide drilling pilot holes into the center of wood studs.
Instructions for opening covers and securely tightening the wall plate to the wall studs.
Placing the template and drilling holes into the concrete or block wall surface.
Inserting concrete anchors and firmly tightening the wall plate to the wall.
Lists all parts and hardware needed for connecting the TV to the wall plate assembly.
Instructions for hanging the arm assembly onto the wall plate and securing it.
Detailed steps for safely lifting and attaching the TV to the arm assembly.
Guides for routing cables and attaching protective covers for a neat finish.
How to adjust the mount's extension, retraction, and side-to-side TV position.
Steps to ensure the TV is perfectly level using adjustment screws.
Adjusting the TV's tilt angle and tension for desired viewing positions.
Step-by-step instructions for safely detaching the television from the mount.
Instructions for detaching the arm assembly from the wall plate.
