D-1034-143a PC5000（E）
DRAWING No. PC5000a 07-0812 2040 6010
5-2-2 DCV / (AC+DC) V measurement
1) Applications
DCV: Voltage of the battery and DC circuit are measured.
(AC+DC)V: Voltage of the AC component+DC component is
measured.
2) Measuring ranges
4 ranges from 5.0000V to 1000.0V
3) Measurement procedure
Connect the plug of black test lead to COM terminal and
plug of red test lead to
V terminal.
Set the function switch to 'V /'
Press "SELECT" button to button ' ' or ' ' measurement.
Apply the red and black test pins to the circuit to measure.
For measurement of DCV, apply the black test pin to the
negative potential side of the circuit to measure and the
red test pin to the positive potential side.
For measurement of (AC+DC)V, apply the red and black
test pins to the circuit to measure.
The reading of Voltage is shown in the display.
After measurement, release the red and black test pins from
the object measured.
—
14
—
Note:
Press "500000" button to toggle 50000 count and 500000 count
at DCV.
To Next Page
Loading...
