Sanyo MCO-19M - Managing Key Lock and Passwords

- 24 -
㻌
㻌
㻌
㻌㻌㻌 <Alarm display>
㻌
䣖 䣧 䣯 䣲 䢵 䢹 䢰 䢲
䤑
䣅 䣅 䣑 䢴 䢷 䢰 䢲 䢧 䣑 䢴 䢷 䢰 䢲 䢧 䣃 䣄
䣕 䣶 䣣 䣶 䣷 䣵
䣙 䣣 䣴 䣰 䣫 䣰 䣩 䢼 䣊 䣫 䣩 䣪 䣖 䣧 䣯 䣲
䢷 䢰 䢲䢷 䢰 䢲䢵 䢺 䢰 䢷
㻌
㻌
z High/low temperature alarm: When high/low temperature alarm is occurred and alarm delay time is not expired,
digits of current chamber temperature display starts blinking.
z High/low CO2 density alarm: When high/low CO2 density alarm is occurred and alarm delay time is not expired,
digits of current CO2 density display starts blinking.
z Hihg/low O2 density alarm: When high/low O2 density alarm is occurred and alarm delay time is not expired,
digits of current O2 density display starts blinking.
z When high temperature alarm is occurred and alarm delay time is expired;
“Warning : High Temp” is displayed in the message field
z When low temperature alarm is occurred and alarm delay time is expired;
“Warning : Low Temp” is displayed in the message field.
z When high CO2 density alarm is occurred and alarm delay time is expired;
“Warning : High CO2 Density “ is displayed in the message field.
z When low CO2 density alarm is occurred and alarm delay time is expired;
“Warning: Low CO2 Density” is displayed in the message field.
z When high O2 density alarm is occurred and alarm delay time is expired;
“Warning: High O2 Density” is displayed in the message field.
z When low O2 density alarm is occurred and alarm delay time is expired;
“Warning: Low O2 Density” is displayed in the message field.