Sanyo MCO-19M - How to Install Roller Base MCO-18 RB

- 92 -
How to install Roller Base
䠄
MCO-18RB
䠅
㻌
㻌
1. As shown in the figure,set the unit on the roller base 䐟 so that its leveling legs can fit into
the holes (4 holes) on the base.
2. Insert the fixture 䐠 from the side to the front leveling leg.
Secure the fixture with 2 screws 䐡.
㻌
㻌
㻌
㻌
㻌
㻌
Leveling leg