- 29 -
㻌
㻌
㻌
㻌
䣑 䣍
䣷 䣵䣕 䣶 䣣 䣶
䣮 䣵䣖 䣱 䣱
䣎 䣱 䣩
䣕 䣧 䣶
䢷 䢰 䢲䢲䢵 䢹 䢰
䣗䣏 䣇 䣐
䣑 䢴䢰 䢲 䢧䢴 䢷䣅 䣑䢰 䢲 䤑䣅䣲 䢵 䢹䣖 䣧 䣯
㻌
㻌
㻌
㻌
䣅 䢴 䢲 䢳 䢲 䢱 䢲 䢷 䢱 䢳 䢹 䣖 䣧 䣯 䣲
䢲 䢳 䢴 䢴 䢶
㻌
㻌
㻌
㻌
䢴 䢲 䢧 䢴 䢲 䢳 䢲 䢱 䢲 䢷 䢱 䢳 䢹 䣅 䣑 䢴
䢲 䢳 䢴 䢴 䢶
㻌
㻌
㻌
㻌
䢻 䢲 䢧 䢴 䢲 䢳 䢲 䢱 䢲 䢷 䢱 䢳 䢹 䣑 䢴
䢲 䢳 䢴 䢴 䢶
㻌
<Display of Log>
z Data log for chamber temperature, CO2 density and O2 density are displayed by dot.
z 24 hours recording per page
z Display range: 5~50䉝 for chamber temperature, 0~22.5% for CO2 density, 0~90.0% for O2 density
z Gradations: 5 for chamber temperature, 2.5 for CO2 density, 10 for O2 density
z Every press up shift key (䊺) and down shift key (䊼), it appears temperature display or
CO2 density display or O2 density display in turn.
z Date and time will be oldered by pressing left shift key (䊹).
z Date and time will be updated by pressing right shift key (䊻).
z Recording time: 2~30 minutes (Factory default: 6 minutes) per day
z Recording period: 2 weeks
z Display resolution: 1䉝 per dot for temperature, 0.5% per dot for CO2, 2.0% per dot for O2, 10minutes per dot
z Older log data will be rewritten if log data is full recorded.
z When you select “Clear” in MENU key and press ENTER key to display confirmation display.
Select “OK” in MENU key and press ENTER key to eliminate all log data.
To Next Page
Loading...
