- 89 -
䐢 Connect connector for electric lock with
connector (White, 2P) and fit to the angle.
Fit the key to lower side of the door.
Note 䠅 Reuse screws to fit each parts.
Electric lock should be secured by new
screws (M5).
䐣 Recommended to fit electric lock first to
the screw holes as arrow pointed in the
left picture when you fit electric lock to the
unit.
䐤 Fit plate meeting to the places as left
picture shown and connect each
connectors.
䠆 Harness for connector (Black, 3P)
should be put thorough the tie.
㻌㻌㻌Peel seal off from insulation and fit the
insulation back to original position.
Plate meeting
Connector (Black, 3P)
Tie
㘽
M5 ࣏ࣜࢱࢺ
㟁Ẽ㘄
ⓑⰍࢥࢿࢡࢱ(2P)
Connector (White, 2P)
Electric lock
Screw (M5)
Key
Connector (Black, 3P)
Connector (Black, 2P)
Connector (Black, 4P)
To Next Page
Loading...
