11
INCUBATOR COMPONENTS
Control panel
1. LCD panel
2. High limit temperature alarm volume (HIGH LIMIT)
To set the temperature of high limit temperature alarm.
3. Low limit temperature alarm volume (LOW LIMIT)
To set the temperature of low limit temperature alarm.
4. Menu button (MENU)
To open the menu window.
5. LCD contrast adjusting knob
To adjust the contrast of graphic LCD.
6. Alarm buzzer stop key (BUZZER)
To silence the alarm buzzer temporarily.
7. Clear key (CE)
To clear the input value during editing of program.
8. Shift key (Upward, downward, rightward, leftward)
To move the cursor on the LCD panel.
9. Enter key (ENTER)
To determine the selection of menu. In program editing, pressing this key causes moving to a next
article.
10. Character input key
11. Fluorescent lamp key (LIGHT ON/OFF)
The key for ON/OFF of fluorescent lamp.
The key is used for the cursor movement on various setting.
※The lighting is available only with temperature range between +2 and +50
o
C when the optional light
add-on kit (MIR-L15) is installed.
1
2
3
4
5
6
7
8
9
10
11
To Next Page
Loading...
