44
ADJUSTMENT OF SHELVES
The interval between the shelves can be adjusted depending on the height of the stored items. To
install the shelves, insert the clip to the desired location.
Note:
● The chamber is refrigerated by the forced circulation of cooled air inside the chamber. Ensure that the
intake and exhaust vents are not blocked. Blocking these vents cause deviation of chamber
temperature from the set temperature.
● Always install the stainless plate on the bottom shelf. The operation without this plate makes the
temperature distribution worse.
● Do not store any materials that can generate the corrosive gas such as sulfureted gas or gaseous
chlorine in the chamber. The corrosive gas may cause failure of the products.
Shelf support
Clip
To Next Page
Loading...
