58
SPECIFICATIONS
Name Cooled Incubator
Model
MIR-554
External dimensions
W800 x D832 x H1810 (mm)
W31.50 x D32.76 x H71.26 (inch)
Internal dimensions
W640 x D550 x H1160 (mm)
W25.20 x D21.65 x H45.67 (inch)
Effective capacity
406 L (14.33 c.f.)
Exterior Painted steel
Interior Stainless steel
Door
Painted steel
Shelf
Polyethylene coated steel wire, Adjustable, 5 shelves
Inner dimensions
：
Upper 4 W580 x D440 (mm), W22.83 x D17.32 (inch)
Bottom 1 W580 x D490 (mm), W22.83 x D19.29 (inch)
Max. load
：
50 kg (110.23 lb)
Access port Inner diameter 40 mm (left and right side)
Insulation Rigid polyurethane foamed-in place
Cooling method
Forced air circulation
Reciprocated compressor
Compressor
Output; 250 W
Evaporator Fin and tube type
Condenser Wire and tube type
Refrigerant
R-404A
Defrost heater 322 W
Temperature controller Microprocessor, PID control (compressor; ON-OFF)
Temperature display Digital display
Alarm High temp. alarm, Low temp. alarm, Independent over-heat/over-cool limiter
Remote alarm contact
Capacity; DC30 V, 2 A
Program function
12 steps, 1 to 99 repeating or unlimited, Max. 10 programs memorized
Memory backup
Nonvolatile memory
Lamp 1 fluorescent lamp (FL15D) 15 W
Accessories 4 rubber caps for access port, 5 shelves, 20 clips, 1 set of key
Weight 195 kg (430 lb)
Optional components
Light add-on kit (MIR-L15), Inner door (MIR-55ID)
Recorder mounting kit (MLR-S144)
Interface board (MTR-480), LAN interface board (MTR-L03)
Data acquisition system (MTR-5000)
Note:Design or specifications will be subject to change without notice.
To Next Page
Loading...
