1
CONTENTS
INTRODUCTION P. 3
PRECAUTIONS FOR SAFE OPERATION P. 4
ENVIRONMENTAL CONDITIONS P. 8
INCUBATOR COMPONENTS P. 9
Control panel P. 11
Switch box P. 12
INSTALLATION SITE P. 13
INSTALLATION P. 14
TOP SCREEN P. 15
FUNCTIONS THROUGH CONTROL PANEL P. 16
STANDBY OPERATION (MENU/Std-by) P. 16
SETTING OF KEY LOCK (MENU/Std-by) P. 17
Setting of key lock (Key Lock) P. 17
Setting of key unlock (Key Unlock) P. 17
PROCEDURES OF SETTING VALUE
Setting of chamber temperature P. 18
Setting of key lock P. 19
HIGH LIMIT/LOW LIMIT ALARM (MENU/Std-by) P. 20
PROGRAMMING (MENU/Edit) P. 21
EDIT OF SAVED PROGRAM (MENU/Edit) P. 27
START OF PROGRAM (MENU/Run) P. 28
JOIN FUNCTION P. 30
SKIP OF STEP (MENU/Skip) P. 31
STOP OF PROGRAM (MENU/Stop) P. 32
AUTOMATIC DEFROST (MENU/Tools/Date Time) P. 33
MANUAL DEFROST (MENU/M.def) P. 34
VARIOUS SETTING (MENU/Tools) P. 35
Display of log (Tools/Log) P. 35
Setting of date, time, log (Tools/Date Time) P. 38
Alarm setting (Tools/Alarm Setting) P. 39
Key lock password setting (Tools/Key Lock PW Setting) P. 40
Default setting (Tools/Default Setting) P. 41
Delete of program (Tools/Delete User Data) P. 42
ADJUSTMENT OF SHELVES P. 44
ALARMS AND SAFETY FUNCTIONS P. 45
MAINTENANCE
Cleaning P. 48
Cleaning of evaporation tray P. 49
Replacement of lamp P. 49
Replacement of glow starter P. 50
Replacement of glow starter (Optional lamp add-on kit (MIR-L15)) P. 50
To Next Page
Loading...
