Sanyo MIR-554 - Setting Key Lock

19
PROCEDURES OF SETTING VALUE
Setting of key lock
Procedures of changing Key Lock setting are shown below.
Procedures of Key Lock(Changing Key Lock setting from 0（Unlock）to 1（Lock）).
Operation Key LCD Display
１
---- Top screen is displayed.
２
Press the menu button (MENU). MENU MENU window is displayed.
３
Select Std-by in MENU window and
press the enter key (ENTER).
ENTER
Stand-by Setting screen is displayed and chamber
temperature setting value is changed into white
letters.
４
Select Key Lock item pressing Shift
keys.
▼
Set value of (Key Lock) is displayed in white letters.
５
Change the value from 0 to 1
pressing the character input key.
Set value of (Key Lock) is displayed in “1”.
６ Press the enter key（ENTER）.
ENTER
The value of top item (Temperature) is displayed in
white letters.
“Key Lock” is displayed in first line.
７
Press the menu button (MENU). MENU MENU window is displayed.
８
Select OK in MENU window and
press the enter key (ENTER).
ENTER
The set value is memorized and top screen is
displayed.
Procedures of Key Unlock(Changing Key Lock setting from 1（Lock） to 0（Unlock）).
Operation Key LCD Display
１
---- Top screen is displayed.
２
Press the menu button (MENU). MENU MENU window is displayed.
３
Select Std-by in MENU window and
press the enter key (ENTER).
ENTER
Stand-by Setting screen is displayed and chamber
temperature setting value is changed into white
letters.
４
Select Key Lock item pressing Shift
keys.
▼
Set value of (Key Lock) is displayed in white letters.
５
Change the value from 1 to 0
pressing the character input key.
Set value of (Key Lock) is displayed in “0”.
６ Press the enter key（ENTER）.
ENTER
Item of （Password） is displayed.
７
Set the password pressing the
character input key.
The password ＊＊＊＊ is displayed.
８ Press the enter key（ENTER）.
ENTER
The value of top item (Temperature) is displayed in
white letters.
“Key Lock” in first line is disappeared.
９
Press the menu button (MENU). MENU MENU window is displayed.
10
Select OK in MENU window and
press the enter key (ENTER).
ENTER
The set value is memorized and top screen is
displayed.
Note: Consult Sanyo sales representative or agent if you put off the password.
０ ０ ０
０
０
１