Sanyo MPR-721 - REFRIGERATOR COMPONENTS; Control panel

REFRIGERATOR COMPONENTS
Control panel
1. Door alarm lamp (DOOR): This lamp is lit when the door is opened.
2. Alarm lamp (ALARM): This lamp flashes during an alarm condition.
3. Digital temperature indicator: This indicator shows the present chamber temperature or set
temperature.
4. Numerical value shift key (^ ): Pressing this key in the set mode causes the numerical value to
scroll up. ON-OFF of key lock can be selected by pressing this key in the key lock mode. See page
16.
5. Digit shift key ( ► ► ): Pressing this key in the set mode alters the digit to be set. Key lock is
available by pressing this key for more than 5 seconds in the temperature display mode. See page 16.
6. Set key (SET): Temperature setting mode is initiated by pressing this key. Once the key is pressed,
the digit to be changed will flash. Pressing this key again after setting the desired temperature stores
the set temperature in the memory.
7. Alarm buzzer stop key (BUZZER): To silence the audible alarm, press this key. Press it once
again to reactivate the alarm.
11
— 49