Sanyo PDG-DXL2000 - Page 35

35
Computer Input
To store the adjusted data, select Store and then press the
Point
 or the SELECT button. Move the highlight to one
of the Modes 1 to 10 in which you want to store, and then
press the SELECT button.
To clear the stored data, select Mode free and then press
the Point
 or the SELECT button. Move the highlight to the
Mode that you want to clear and then press the SELECT
button.
Note:
• When input computer signal to the projector,
PC adjust
will become available.
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
This Mode has stored
parameters.
Values of Total dots, Horizontal,
and Vertical.
Mode free Menu
Vacant
Press SELECT button to
store adjusted data.
Press MENU button
to close this dialog
box.
Store Menu
Store
Mode free
Reset