Sanyo PDG-DXL2000 - Video Input; Input Source Selection (Video, S-Video)

41
Choose Video or S-video by pressing the VIDEO button or
the S-VIDEO button on the remote control.
1
2
Input Menu
Input Source Selection (Video, S-video)
Video Input
When video input signal is connected to the
VIDEO jack, select Video.
Video
When video input signal is connected to the S-
VIDEO jack, select S-video.
S-video
Note:
When the Input Search function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.51).
Remote Control
VIDEO button
Press the MENU button to display the On-Screen
Menu. Use the Point
54
buttons to select Input and
then press the Point

or the SELECT button.
Use the Point
54
buttons to select either Video or
S-video and then press the SELECT button.
S-VIDEO button
Video
S-video
Direct Operation
Menu Operation