53
This function decides whether to display On-Screen
Displays.
On ........................... Show all the On-Screen displays. Use
this function when you want to project
images after the lamp becomes bright
enough. The factory default setting is
this option.
Countdown off ....... Show the input image instead of
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off ........................... Hide the On-Screen Displays except;
L On-Screen Menu
L Power off? (p.22)
L No signal for Power management.
(p.57)
L Please wait ...
L Arrows for the True mode in the
Screen Menu (p.38)
L P-Timer
Setting
Select the background screen for when no input signal is
detected. Press the Point
54
buttons to switch between
each option.
Blue . . . Project a blue background.
User . . . Project an image captured in the Logo setting.
Black . . Project a black background.
Background
Display
This function allows you to customize the screen logo with
Logo select, Capture, Logo PIN code lock and Logo PIN
code change functions.
Note:
When On is selected in the Logo PIN code lock function,
Logo select and Capture functions can not be selected.
Logo select
This function decides on the starting-up display from
among following options.
Off ........... Show the countdown display only.
Default .... Show the factory-set logo.
User ........ Show the image you captured.
Logo select
Logo (Logo and Logo PIN code lock settings)
To Next Page
Loading...
