-41-
Optical Parts Disassembly
Polarized glass ass'y and Optical filter ass'y removal.
1. Remove each 1 screw-A(M2.5X6) and remove the stopper.
2. Remove the Polarized glass ass'y and remove the Optical filter ass'y.
Fig.26a
Stopper
Polarized glass ass'y
A
* The optical filter must be used with the specified parts according to the mounted prism assembly type, Type-L or
Type-R. See the parts list for further details.
Holder POL
Thermistor(TH902)
Holder OF
Spacer
Optical filter
Polarized glass
Fig.26b
Marker is printed on
this top side.
Film attached side
faces this side.
A
A
Optical filter ass'y
Optical filter ass'y
Polarized glass ass'y
Stopper
Only the B-Polarized glass ass'y
provides these parts.
Prism side
26-1
To Next Page
Loading...
