Sanyo PLC-XF47 - PC Image Adjustment and Tuning

- 34 -
Note : Removed grounding lead from the grounding mark may be reassembled in the same location.
FN909
FN910
A
A
B
B
C
C
C
D
D
E
E
E
E
F
F
F
G
G
G
G
F
H
H
8-1
Fans(FN909,FN910) and Holders removal.
1. Remove 2 screws-A and remove the Cover -E.
2. Remove 2 screws-B and remove the Fan(FN909).
3. Remove 3 screws-C and remove the Cover -F.
4. Remove 2 screws-D and remove the Fan(FN910).
5. Remove 4 screws-E and remove the Holder-A.
6. Remove 4 screws-F and remove the Holder-B.
7. Remove 4 screws-G and remove the Holder-C.
8. Remove 2 screws-H and remove the Holder-D.
8-2
Grounding Leads removal.
1. Remove 2 screws-A and remove the grounding leads from the Holder.
Mechanical disassemblies
A
A
Holder-C
Grounding lead
Grounding
lead
Grounding Mark
Cover-E
Holder-B
Cover-F
Holder-D
Holder-A