Need help?Do you have a question about the Sanyo PLC-ZM5000 and is the answer not in the manual?
General| Brightness | 5000 ANSI lumens |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Contrast Ratio | 2000:1 |
| Display Technology | 3LCD |
| Lamp Life | 2000 hours |
| Aspect Ratio | 4:3 |
| Projection Size | 30 to 300 inches |
| Lamp Life (eco mode) | 3000 hours |
| Lamp Life (normal mode) | 2000 hours |
| Input Ports | VGA, Composite, S-Video, HDMI |
| Output Ports | VGA |
| Lamp Type | UHP |
| Weight (alternative) | 7.5 kg |
Covers motor-driven lens shift, PiP, corner correction, and shutter functions.
Includes remote control, multilingual menus, simple computer setup, and power management.
Focuses on security functions, direct power off, and automatic filter replacement.
Important safety information regarding installation, operation, and potential hazards.
Guidance for projector owners, including specific notes for EU users.
Covers safe operation, handling, placement, installation, and ventilation precautions.
Warnings on electrical hazards, servicing, and safe transportation/handling procedures.
Information regarding FCC compliance for Class B digital devices and potential interference.
Details on AC power cord specifications, grounding, and plug types for different regions.
Identifies key external parts, controls, and indicators on the projector.
Details projector interface terminals and the functions of the remote control.
Guidance on projector placement, lens adjustments, and installation procedures.
Instructions for connecting computers, video, audio sources, and the AC power cord.
Procedures for turning the projector on and off, and interpreting status indicators.
Instructions on how to access and use the projector's on-screen menu for settings.
Explains how to use essential controls like lens, sound, keystone, pointer, and mouse functions.
How to select input sources directly using projector buttons or the remote control.
Steps to select the correct input source for computer and video connections.
Selecting computer system modes and performing automatic PC adjustments for optimal image.
Manual adjustments for image quality, screen size, aspect ratio, and keystone correction.
Selecting video system standards and input sources like Video, S-Video, SCART, HDMI.
Adjusting video image quality, screen display settings, and keystone correction.
Navigating the setting menu and configuring basic display and startup options.
Setting up security features like PIN codes and configuring network access for the projector.
Configuring lamp modes, filter warnings, fan speed, remote control, power management, and timers.
Detailed steps for replacing the projector filter and resetting its counters.
Instructions for replacing the projector lamp, including safety precautions and handling.
Guidelines for cleaning the projector and understanding status indicators for maintenance.
A comprehensive guide to diagnosing and resolving common projector operational issues.
Detailed specifications on projector performance, supported resolutions, and technical data.
Information on physical interfaces, serial control commands, and projector status management.
Describes Web Management and E-Mail Alert functions for network monitoring.
Specifies the necessary operating system, CPU, memory, and software for network operation.
Details cabling requirements, network specifications, and installation flow for network setup.
Steps for connecting to the LAN and configuring network settings like IP address and DHCP.
Setting a network PIN code for access restriction and viewing network information.
How to restore wired LAN settings to their factory default configurations.
Logging into the projector's web interface and understanding its navigation and setting types.
Configuring network parameters, PIN codes, PJLink, and initial settings for secure access.
Setting up e-mail alerts, SNMP, and managing projector status via network.
Managing projector power status and monitoring operational conditions remotely.
Remotely configuring input sources, system modes, sound, image, and PC adjustments.
Configuring screen settings, shutter, filter, and other maintenance-related functions via network.
Illustrates network connection types and provides instructions for using Telnet for control.
Guides on setting up web browsers and proxy servers for projector access.
Addresses common questions, troubleshooting tips, and rules for IP address assignment in network environments.
To Next Page
