40
Chapter 4 Controlling the Projector
Item Description
Screen aspect ....Sets the aspect. {Default(16:10), 16:9, 4:3}
Keystone................Corrects the keystone distortion of the
projected image on the screen by press-
ing the Up/Down/Left/Right buttons.
Click Reset to reset the keystone correc-
tion.
Digital zoom.......Adjusts the image zoom in and out at
computer input mode.
Click OFF to return the image to its nor-
mal size.
Reset.........................Resets the settings of Screen, Ceiling,
Rear, Keystone and Digital zoom.
Item Description
Zoom .......................Adjusts the image zoom in and out.
Focus........................Adjusts the focus of the image.
Lens shift...............Positions to the desired point by pressing the Up/Down/Left/Right buttons.
Click Reset to return to the center position.
* Step(s)..................Sets the effective steps (1-20 steps) by one pressing the +/- or Up/Down/Left/Right
buttons to adjust them quickly.
Lens adjustment
The mark "" means that
the available screen mode
in the selected input
source system.
*1 The error message appears
when selecting the dis-
abled screen mode indi-
cated with "*1".
*2 Natural wide cannot be
selected when 720p, 1035i,
1080i or 1080p is selected
in AV system menu.
Screen Aspect Default(16:10) 16:9 4:3
Input source Input source Input source
Screen mode Video PC Video PC Video PC
Normal
Full
Wide(16:9)
*1 *1
Zoom
True *1
*1
*1
Natural wide *2 *1 *2 *1 *1 *1
Custom
To Next Page
Loading...
