Sanyo PLV-Z4 - Connecting to Video Equipment (Video, S-Video); Connecting to Video Equipment (Component)

16
Installation
Connecting to Video Equipment (Video, S-Video)
SERVICEPORT
HDMI COMPUTER
COMPONENT1
COMPONENT2
VIDEO
S-VIDEO
Pb/CbYPr/Cr
Video Equipment
S-video
Cable
S-VIDEO
Output
S-VIDEOVIDEO
Composite
Video Output
Video Cable
(RCA x 1)
Video, S-video
Use the supplied video cable or a S-video cable (commercially
available).
Note:
When connecting cables, the power cords of both the projector and external
equipment should be disconnected from the AC outlet.
SERVICEPORT
HDMI COMPUTER
COMPONENT1
COMPONENT2
VIDEO
S-VIDEO
Pb/CbY Pr/Cr
Video Equipment
Component Video Output
(Y, Pb/Cb, Pr/Cr)
COMPONENT
Component
Use a component cable (optional).
Connecting to Video Equipment (Component)
Component
Cable
(RCA x 3)
✔Note:
• See page 55 for ordering optional cables.
This projector can be connected up to six equipment at one time. See the figures below for the connections.