Sanyo PLV-Z4 - Connecting to Video Equipment (HDMI, RGB Scart); Connecting to a Computer

17
Installation
Connecting to a Computer
RGB Scart
Use a Scart-VGA cable (optional).
SERVICEPORT
HDMI COMPUTER
COMPONENT1
COMPONENT2
VIDEO
S-VIDEO
Pb/CbYPr/Cr
Video Equipment
COMPUTER
RGB Scart
21-pin Output
Scart-VGA
Cable
SERVICEPORT
HDMI COMPUTER
COMPONENT1
COMPONENT2
VIDEO
S-VIDEO
Pb/CbYPr/Cr
Video Equipment
HDMI
HDMI
Cable
HDMI
Use a HDMI cable (optional) for HDMI output.
Connecting to Video Equipment (HDMI, RGB Scart)
HDMI Video
Output
Note:
When connecting cables, the power cords of both the projector and external
equipment should be disconnected from the AC outlet.
✔Note:
• See page 55 for ordering optional cables.
SERVICEPORT
HDMI COMPUTER
COMPONENT1
COMPONENT2
VIDEO
S-VIDEO
Pb/CbYPr/Cr
COMPUTER
IBM-compatible or Macintosh computer
Monitor Out
Computer (Analog)
Use a VGA cable (commercially available) or a DVI-VGA cable
(commercially available).
DVI-VGA
Cable
VGA
Cable