Sanyo PLV-Z4 - Information; Input Source Information Display

40
Information
Input Source Information Display
This is used for checking the status of the image signal being projected and the operation of the projector.
Video or S-video
A color system of the connected video
signal is displayed from among PAL,
SECAM, NTSC, NTSC4.43, PAL-M, PAL-N.
Signal
Component
H-sync freq.
V-sync freq.
Lamp Time
Information Menu
A system mode of the connected video
signal is displayed from among 480i, 480p,
575i, 575p, 720p, 1080i.
HDMI
A system mode of the connected video
signal is displayed from among D-VGA, D-
480i, D-480p, D-575i, D-575p, D-720p, D-
1080i.
PC
A resolution of the connected computer
signal is displayed.
No signal
When there is no signal input, “- - - -” is
displayed.
Out of recognition
When the connected input source is out of
recognition, “Unknown” is displayed.
The horizontal frequency of the input signal is displayed in KHz, or
“- - - -” when no signal.
The vertical frequency of the input signal is displayed in Hz, or
“- - - -” when no signal.
The cumulative lamp operating time is displayed.