3
3 - 61
Control of Mini ECO-i SYSTEM
5. Schedule Timer
Some of the above features are disabled when the unit is installed. If the
button of a disabled feature is pressed, appears on the display.
For more information, contact your dealer.
A: PROGRAM button Use to start setting programs and to enter program settings.
B: PROG. COPY buttons Use to copy programs to groups or specific days in a schedule.
C: CLEAR button Press to clear the settings of the currently displayed program.
T•
•
•
he current program is not cleared unless the button is pressed
after pressing the CLEAR button.
D: Setting buttons
Use to make program settings and to set the present time.
Press to set groups for programmed operation.
Press to set today’s day and days of programmed operation.
Press to set the present time and times used in programmed operation.
Use to start/stop indoor units via the timer.
Use to enable/disable remote controller operation via the timer.
Use to set programmed operation trigger time.
Program settings are not entered unless the button is pressed at
the end of setting operations.
E: HOLIDAY button Press to set and cancel holidays during a scheduled week of operation.
F: CANCEL button Press to cancel the current program setting operation, copying operation or
holiday setting operation. When the CANCEL button is held down for 2
seconds, the current setting operation or copying operation is canceled and
the normal display returns.
G: TIMER OFF button Press to turn the timer OFF when timer operation will not be used for a long
period of time. When this button is held down for 2 seconds,
appears on the display. Programs cannot be run until the button is again held
down for 2 seconds.
A: PROGRAM button
E: HOLIDAY button
C: CLEAR button
G: TIMER OFF button
D: Setting buttons
B: PROG. COPY buttons
F: CANCEL button
Schedule Timer / SHA-TM64AG
I Operation Buttons
06-405 Mini-ECOi_TD3 11/6/06 6:18 PM Page 61
To Next Page
Loading...