3
3 - 88
Control of Mini ECO-i SYSTEM
6. Simplified Remote Controller
I Display
Description
A: This is displayed to indicate that the system controller is being used
for control.
When
indicator is flashing on the display, the operation is not
accepted by the system controller.
B: When the unit is in heating standby status, the indicator
appears.
C: This displays the temperature setting.
D: This displays alarm messages when an error occurs.
E: This is displayed when using the temperature sensor in the remote
control unit.
F: This is displayed only if an abnormality occurs within a unit.
G: The currently selected FAN SPEED is displayed.
H: When the TEST button is pressed, the TEST indicator appears.
I: The currently selected operation mode is displayed.
B
A
C
D
E
I
H
F
G
06-405 Mini-ECOi_TD3 11/6/06 6:18 PM Page 88
To Next Page
Loading...