139 English
CONNECTING TO A TV
Playback
i After connecting the digital camera to the television, set the TV input switch
to VIDEO input.
i When an AV interface cable is connected, no image appears on the
camera’s LCD monitor.
i The playback method is the same as when viewing images on the
camera’s LCD monitor.
i The playback operations can be controlled with the remote control unit
(page 140).
i The same playback procedure as when playing back with the camera is
used to play back audio recordings as well.
Audio playback: see page 48
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
To Next Page
Loading...
Need help?
General
