127 English
COPY FILES
5 Press the SET button.
h The screen to select the type of
copy appears.
h The copy source image is shown in
the background on the screen.
COPY SINGLE:
Copy one file.
COPY ALL:
Copy all the files from the copy source
to the copy destination.
6 Select the desired type of copy.
<When selecting “COPY SINGLE”>
1 Press the [G] or [H] button to display the file you wish to copy.
2 Press the [T/]] or [W/P] button to select “COPY SINGLE”.
<When selecting “COPY ALL”>
1 Press the [T/]] or [W/P] button to select “COPY ALL”.
7 Press the SET button.
h The files are copied.
CARD
INT MEM
COPY ALL
COPY SINGLE
OK
To Next Page
Loading...
