143 English
POWER SAVE FUNCTION
Your camera has a “power save” function whereby the power automatically
turns off after a specified period of inactivity. The power save function works
to conserve the battery pack power when the camera is not being used, or to
prevent the battery pack from dying if the camera has accidentally been left
on. You can specify the elapsed time (standby time) before the power save
function is activated.
1 Display the Option Setting Menu [3] (page 129).
2 Select “POWER SAVE”, and press
the SET button.
RECORDING:
Set the standby time for the shooting
modes when the battery pack is
used.
PLAYBACK:
Set the standby time for the playback
modes when the battery pack is
used.
OK
RECORDING
POWER SAVE
PLAYBACK
1 min
5 min
To Next Page
Loading...
Need help?
General