English 28
SETUP
Install the card
The card can be used after it has been formatted with the camera
(page 148).
1 Open the battery/card
compartment cover.
2 Insert the card.
h Firmly insert the card until it
clicks into place.
3 Close the battery/card compartment cover.
<When removing the card...>
h To remove the card, press it
down, and then release. The
card will protrude slightly, and
you can then pull it out.
1 Open
Card slot
2 Insert
1 Open
2 Push
3 Pull out
To Next Page
Loading...
