Sanyo Xacti VPC-E2 - Select the Startup Display

131 English
SELECT THE STARTUP DISPLAY
The startup display is the display that appears on the monitor when the
camera is turned on in the recording mode.
1 Display the Option Setting Menu [E1] (page 129).
2 Select “STARTUP DISPLAY”, and
press the SET button.
DATE & TIME:
The camera’s date and time setting
is shown.
Xacti:
The Xacti logo is shown.
INDEX:
An animated character (penguin) is
shown.
OFF:
No startup display.
3 Select the desired setting, and press the SET button.
h The selected startup display is set.
OK
OFF
INDEX
Xacti
DATE & TIME
STARTUP DISPLAY