OPTION SETTINGS
English 142
TV SYSTEM SETTING
Specify the type of image signal that is output from your camera’s USB/AV
terminal.
1 Display the Option Setting Menu [2] (page 129).
2 Select “TV SYSTEM”, and press the
SET button.
h The TV System Screen appears.
NTSC:
Outputs NTSC video signals.
PAL:
Outputs PAL video signals.
3 Select the desired setting, and press the SET button.
h The selected TV system is set.
HINT
If no image appears on the TV...
i If the TV system setting is not correct for the connected equipment, no
image will appear on the TV.
When set to “PAL” and connected to a TV using the included AV
interface cable (page 155)
Shooting: Images are displayed on the monitor only and do not appear on
the TV.
Playback: Images are displayed on the TV only and do not appear on the
monitor.
TV SYSTEM
NTSC
PAL
OK
To Next Page
Loading...
