Sanyo Xacti VPC-E2 - Page 191

APPENDICES
English 174
Shooting
A warning tone
(beep-beep-
beep) sounds,
and it is not
possible to
take a picture
using the self-
timer.
The battery
pack is
consumed.
Install a
sufficiently
recharged
battery pack.
23, 25
When zooming
in or out, the
zoom
movement
stops
momentarily.
The optical
zoom has
moved to the
maximum
magnification
position.
Not a
malfunction.
Release the
[T/]] button
once, then
press it again.
66
There is noise
in the captured
image.
The ISO
sensitivity
setting is too
high.
Set the ISO
sensitivity to a
lower setting.
98
When
recording a
video clip
under
fluorescent
lights, a
noticeable
flicker appears
in the image.
This occurs
when the
shutter speed
is too fast.
Set the ISO
sensitivity to
v or less.
98
Problem Cause Action
Reference
page