17
How to Operate the Balance
After you have initially plugged your balance into a wall outlet (or
after a relatively long power outage), allow for at least 30 min-
utes' warmup
The weight display shows the following messages for your informa-
tion:
{
{{
{
(OFF)
The balance was disconnected from AC power (power failure or out-
age for longer than approx 3 seconds, reconnection to AC power after
the balance was unplugged).
(Standby
The display has been turned off with the ON/OFF key
(16)
and the
balance is now in the ready-to-operate mode so that it does not re-
quire warmup.
(Busy)
After the balance is turned on, the
symbol is displayed until you
press a key for the first time. During Operation: The processor is still
busy processing a function and will not accept any other command to
perform functions at this time.
To Next Page
Loading...
