21
Below-Balance Weighing
A port for below-balance weighing is available on the bottom of the
balance (not on models BA 160 P, BA110 S, BA61, BA110, BA 210
or BA 2100).
To fasten an attachment or hanger, open the below-balance port by
removing the two screws on the bottom of the balance and detach the
closing plate.
Now you can attach a sample using a Suspension wire, for example.
Common applications for below-balance weighing include specific
gravity determination or immersing a sample in a special atmosphere
(medium for a reaction).
Important Note
When you use such below-balance weighing attachments, you must
install a shield to eliminate drafts.
How to Fasten an Antitheft Locking Device
To fasten an antitheft locking device, use the lug
(11)
located on the
rear panel of the balance.
To Next Page
Loading...
