28
In the balance operating program, each code setting is indicated by
"o"
behind the last number. When you access the menu of the bal-
ance operating program and move to the right-hand number, the cur-
rent code setting is displayed. This makes it easy to check the codes
you have set.
How to Undo All Menu Code Changes:
Reset Function
The reset function lets you undo all menu code changes, which
means you obtain the menu codes originally set at the factory
(marked by “*”) so your balance will operate according to them.
To use this function, set code
9 - - 1
o
.
Confirm and store this entry as
described on page 27.
To Next Page
Loading...
