31
The duration and number of measurements should be determined by
a qualified Sartorius service technician according to the particular am-
bient and operational conditions for the AC adapter. However, such
inspections should be done at least once a year,
The electrical and electronic components used in the balance are
rated at least Class KSF according to DlN 40040.
Pursuant to the German Directive for the Implementation of
Regulations for Prevention of Accidents "Elektrische Anla-
gen und Betriebsmittel (VBG 4)" [Electrical Installations and
Equipment] of April 1986, in conjunction with Article 10 of
the Low Voltage Directive 73/23/EEC issued on February
19, 1973, by the European Community, it is hereby certified
that the equipment delivered, "Electronic Analytical or Pre-
cision Balance of the Basic Series" is manufactured and
tested in compliance with the following DIN/VDE regula-
tions
DlN IEC 348/VDE 0411
Safety requirements for electronic measuring apparatus
DIN IEC 380/VDE 0806
Safety of electrically energized office machines
DIN IEC 601 /VDE 0750
Safety of medical electrical equipment
When you use electrical equipment in installations and
under ambient conditions requiring higher safety Stan-
dards, you must comply with the provisions as specified in
the applicable regulations for installation in your country.
To Next Page
Loading...
