Control Commands with Lower-Case Letters
All functions that can be selected by pressing the respective keys on the balance
can also be activated by commands.
v function key
q function key
c clear function
Perform calibration test*
Output scale model
Output serial number
Each control command with the lower-case letters “f,” “s” and “x” must be
terminated by an underline (ASCII = 95).
* = only for balances with a built-in automatic calibration weight
ESC x 2
_
CR LF
ESC x 1
_
CR LF
ESC x 0
_
CR LF
ESC s 3
_
CR LF
ESC f 1
_
CR LF
ESC f 0
_
CR LF
62
To Next Page
Loading...
Need help?
General