Operating Instructions EVO1S1 | SPO1S1 17
Installation
Mains adapter set YAK03
h) light brown China
i) black India
j) green Korea
t Push (1) and slide (2) the mains adapter required for your power supply into the
opening of the AC adapter module.
When doing this, the mains adapter needs to lock into position.
Removing / Replacing the Mains Adapter
t Unlock (1) the mains adapter and then detach (2) it.
Power Connection / Safety Precautions
− Only use original Sartorius AC adapters.
The AC adapter has an IP rating of IP40 in accordance with EN 60529 / IEC60529.
− Make sure that the voltage rating printed on this unit matches the voltage at the
place of installation.
− If the stated supply voltage or the plug design of the AC adapter does not comply
with your country’s standard, please inform the nearest Sartorius representative.
− The power must be connected in accordance with the regulations applicable in
your country.
4.4.2 Connecting the Scale
Connecting the Scale
t Insert the USB cable into the USB socket on the back of the display.
To Next Page
Loading...
