30 Operating Instructions EVO1S1 | SPO1S1
Technical Data
11 Technical Data
11.1 General Data
Scale Unit Value
Power supply only via USB interface or Sartorius AC adapter YPS06-USB
Input supply voltage V
DC
+5.0
Power consumption W 2.0
Other data IP40 in accordance with EN 60529/IEC 60529
Ambient conditions
The specifications apply under the following ambient conditions:
Environment For indoor use only
Operational capability °C Guaranteed between +5 - +45
Storage and shipping °C –10 - +60
Relative humidity % 15 % to 80 % for temperatures up to 30 °C non-condensing, decreasing
linearly to 50 % relative humidity at 40 °C
Interface onnection USB, type B (virtual serial interface)
Format 7-bit ASCII, 1 start bit, 1 or 2 stop bits
Parity Even, odd, no parity
Transmission rates 600 to 57,600 bps
Handshake Software or hardware
Electromagnetic compatibility As per EN 61326-1 / IEC61326-1 Electrical equipment for measurement,
control and laboratory use – EMC requirements – Part 1: General
requirements
Immunity to interference Basic requirements
Transient emissions Class B
Suitable for use in residential areas and areas that are connected to a low
voltage network that also supplies residential buildings.
Available application programs Recalculation, formula
AC adapter YPS06-USB (optional)
USB power plug (5 V / 900 mA) Type FW7712 (manufacturer’s certificate)
Primary 100 — 240 V~, -10 % / +10 %, 50 — 60 Hz, 0.125 A
Secondary 5 V
DC
, ± 5 %, 900 mA (max.)
Other data Protection class II
IP40 in accordance with EN 60529/IEC 60529
To Next Page
Loading...
Need help?
General