Operating Instructions EVO1S1 | SPO1S1 27
Care and Maintenance
7 Care and Maintenance
7.1 Cleaning
Electrical hazard from voltage or current!
Disconnect the AC adapter from the power supply. If necessary, also disconnect the
data cable connected to the scale. Never open the scale or the AC adapter.
The parts contained in these cannot be cleaned, repaired or replaced by the operator.
− Make sure that no liquid or dust gets into the scale or the AC adapter.
− Only use soft brushes and cloths for cleaning.
− Never use cleaning agents that contain solvents or abrasive ingredients
(e. g. scouring cream, steel wool).
This can ultimately damage the equipment.
Do not clean the following parts with acetone or aggressive cleaning agents:
mains plug, data interface, labels, and all other plastic parts.
Cleaning the Control Panel
t Turn off the device before cleaning the user interface, since touching the screen
could trigger unwanted inputs.
Cleaning the Scale Housing
t Clean the device.
t Use a soft cloth to dry the device.
7.2 Maintenance
Electrical hazard from voltage or current!
Repair work on the AC adapter (optional) must only be carried out by trained service
technicians. Contact Sartorius Service for proper repairs (see Chapter 14.1, page 36).
To ensure the continued accuracy of your scale, we recommend scheduling regular
servicing at least once a year.
Sartorius Service offers different service contracts with maintenance intervals that
are tailored to your needs.
A calibration certificate should always be issued as part of every maintenance
session.
Safety inspections of the AC adapter and its connections must be performed at
appropriate intervals by a qualified electrician (e. g., every 2years).
To Next Page
Loading...
Need help?
General