Operating Instructions EVO1S1 | SPO1S1 11
Device Overview
3.4 Menu List
The “o” in the active column indicates the activated function in the respective menu.
Level 1 Level 2 Level 3 Active Level 4 Function CODE
SETUP
1.
| - - - -
Scale
1.1
| | - - -
AMBIEN.
Setup location 1.1.1
| | |- - - -
V.STABL.
Very stable ambient conditions 1.1.1.1
| | |- - - - o
Stable
Stable ambient conditions 1.1.1.2
| | |- - - -
UNSTAB.
Unstable ambient conditions 1.1.1.3
| | |- - - -
V.UNSTB.
Very unstable ambient conditions 1.1.1.4
| | - - -
filter
Application filter 1.1.2
| | |- - - -
FIN.RD.
Final readout 1.1.2.1
| | |- - - - o
FILL.WT.
Filling weight 1.1.2.2
| | - - -
STAB.RG.
Stability range / Stability 1.1.3
| | |- - - -
1/2-DIG.
1/2 digit / Good 1.1.3.2
| | |- - - -
1-DIG.
1 digit / Normal 1.1.3.3
| | |- - - - o
2-DIG.
2 digits / Sufficient 1.1.3.4
| | |- - - -
4-DIG.
4 digits / Low 1.1.3.5
| | - - -
AUTOZ.
Automatic zero / Drift correction 1.1.6
| | |- - - -
ON
On 1.1.6.1
| | |- - - - o
Off
Off 1.1.6.2
| | - - -
WT.UNIT
Weight units 1.1.7
| | |- - - - o
Grams
Grams 1.1.7.2
| | |- - - -
PT.P.LB
Parts per pound 1.1.7.14
| | - - -
DSP.DEC.
Accuracy 1.1.8
| | |- - - - o
ALL
Show all decimal places 1.1.8.1
| | |- - - -
PolyR.
Multi-interval lab 1.1.8.13
| | - - -
CAL.JST.
Calibration / Adjustment 1.1.9
| | |- - - - o
CAL.EXT.
External calibration/adjustment with default weight 1.1.9.1
| | |- - - -
LIN.EXT.
External linearization with default weight 1.1.9.6
| | |- - - -
LOCKED
CAL key / Command locked 1.1.9.10
|
APP.PRG.
1.3
| | - - -
UNIT 2
2nd unit 1.3.1
| | |- - - - o
Grams
Grams 1.3.1.2
| | |- - - -
PT.P.LB
Parts per pound 1.3.1.14
| | - - -
DEC 2
Second unit accuracy 1.3.2
| | |- - - -
ALL
Show all decimal places 1.3.2.1
| | |- - - - o
PolyR.
Multi-interval lab 1.3.2.13
| | - - -
TOGGLE
Toggle key on/off 1.3.3
| |- - - -
ON
Toggle key on 1.3.3.1
| |- - - - o
OFF
Toggle key off 1.3.3.2
Continued on next page
To Next Page
Loading...
