Entering the General Password
Enter/Change Password
Select the Setup menu: M
> The soft keys info, menu
and input are displayed in the
text line
Select the user data input
function: Press the input soft
key (v/[FUNCTION])
> The password prompt is
displayed (ENTER PASSW.)
Enter the General Password
(see below)
Press the ENTER PASS.
soft key (v/[FUNCTION])
> The last 8 digits of a workstation
ID (balance ID no.), if available,
are displayed in the measured
value line
Select password setting:
Press y
> If a password exists, it is
now displayed in the measured
value line
New password: Enter
the letters/numbers for the new
password (8 characters max.)
To delete the password,
enter a decimal point using the
. key and confirm
Confirm input: Press X
Exit the Setup menu:
Press M
> Restart your application
General Password: 40414243
Appendix
To Next Page
Loading...
